Beurer FC 90 Gebrauchsanweisung Seite 13

4.1 Care treatment function (mornings):
Preheating phase
30 seconds
• Apply the Advanced Hydro Lift Cream to the area of your face that you wish to treat.
• Press the ON/OFF button
• Press the heat button first
heating phase for 30 seconds. "WAITING" is shown in the display. As soon as the "WAITING" display
turns off, the device is ready to use.
• Now use the treatment head to gently massage your face in circular motions.
• After two minutes of treatment, press the cool button
now in the precooling phase for 30 seconds. "WAITING" is shown in the display. As soon as the "WAI-
TING" display turns off, the device is ready to use. Continue with the treatment for another two minutes.
• To switch the device off again, press the ON/OFF button
4.2 Combination of cleansing and care treatment functions (evenings):
Cleansing:
Preheating phase
30 seconds
• Apply the cleansing milk to your face.
• Press the ON/OFF button
• Press the heat button first
heating phase for 30 seconds. "WAITING" is shown in the display. As soon as the "WAITING" display
turns off, the device is ready to use.
• Now use the treatment head to gently massage your face in circular motions.
• After three minutes, press the positive ions button
ter the cleansing treatment, wash your face with lukewarm water.
Care:
After you have completed the cleansing treatment function, continue with the care treatment as follows:
Preheating phase
30 seconds
1 min
• Clean the treatment head with a lint-free cloth until there is no trace of cleansing milk left on the head.
• Apply the Advanced Hydro Lift Cream to the area of your face that you wish to treat.
• Press the heat button first
heating phase for 30 seconds. "WAITING" is shown in the display. As soon as the "WAITING" display
turns off, the device is ready to use.
• Now use the treatment head to gently massage your face in circular motions.
• After one minute of treatment, press the cool button
30 seconds. "WAITING" is shown in the display. As soon as the "WAITING" display turns off, the device
is ready to use. Continue with the treatment for another minute.
• Repeat this heat and cool treatment as described above for one minute each. If necessary, apply a little
more Advanced Hydro Lift Cream.
• To switch the device off again, press the ON/OFF button
heat Precooling phase
30 seconds
2 min
on the device.
and then press the negative ions button
heat heat
3 min 1 min
on the device.
and then press the negative ions button
heat
Precooling phase
30 seconds
and then press the negative ions button
cool
2 min
and the negative ions button
.
and continue the treatment for another minute. Af-
cool Repeat the process
once from the beginning
1 min
. The device is now in the precooling phase for
.
13
. The device is now in the pre-
. The device is
. The device is now in the pre-
. The device is now in the pre-