AEG DVD 4626 iP Bedienungsanleitung Seite 46

ENGLISH
46
Fig. 2/22
Fig. 2/20
Fig. 2/21
Fig. 2/25
NOTE: for iPod or iPhone Video playback
If you also want to play videos from your iPod or iPhone via the docking
port, please note that the picture is only displayed via the SCART and
S-VIDEO connection.
SCART
SCART is used to transmit both Video and Audio data.
1. Plug the SCART jack firmly into the socket on the back of the player.
2. Plug the SCART jack into the corresponding socket on your playback
device.
HDMI
Connection using a HDMI cable ensures a very high replay quality.
HDMI is used to transmit both Video and Audio data.
1. Plug the HDMI jack into the socket on the back of the player.
2. Plug the HDMI jack into the corresponding socket on your playback
device.
Component Video
Connection using a Component Video cable ensures a very high replay
quality.
Component Video transmits only Video signals.
1. Plug each of the three jacks into the corresponding sockets on the
DVD-Player.
2. Plug the jacks into the corresponding socket on your playback device.
Select "Component" from the menu "Video Setup Page". Here you
can change the settings "S-Video", "YUV and "RGB" on the playback
device that you have connected. Please see the operating instructions
of the connected device for the correct setting.
S-Video
Connection using a S-Video cable ensures a very high replay quality.
Component Video transmits only Video signals.
1. Plug the S-Video jack into the socket on the back of the player.
2. Plug the S-Video jack into the corresponding socket on your playback
device.