Disposal Considerations; Declaration Of Conformity - Klarstein 10003428 Bedienungsanleitung

Failure
No cooling
Poor cooling
performance
Noisy
Frost or ice
inside minibar
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailed information about recycling of this product, please contact your local council or your
household waste disposal service.
Producer: CHAL-TEC Vertriebs- + Handels GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
9
Troubleshooting
Possible reason
No power
PCB broken
Fan broken
Leakage
Cooling module broken
High ambient temperature
Poor instruction
Poor ventilation
Poor gasket
Poor silicone
Dust
Fan broken
Poor heat pump
No defrost
Low ambient temperature

Disposal Considerations

Declaration of Conformity

Action
Check the electricity supply, or change a new plug.
Replace a new PCB.
Replace a new fan.
Replace a new heat pump.
Replace a new cooling module with silicone.
The room temperature is hotter than normal.
The door is opened too often.
Install minibar according to our ventilation instruction.
Replace a new door gasket.
Change the silicone on the surface of the cooling module.
Clean the dust from the fan.
Change to a new fan.
Replace a new heat pump.
Stop minibar working for at least one hour, then restart it.
Adjust the air-conditioner to be around 25degree.