The Settings Menu - OK. OPR 100 Gebrauchsanweisung

•
To pause playback, press the PLAY/PAUSE button (29) on the remote control or the INPUT/OK/PLAY/PAUSE button
(11) on the projector. Press the button again to continue playback.
•
To open the previous file, press the PREVIOUS button (27) on the remote control.
• To open the next file, press the NEXT button (31) on the remote control.
• To open the playback menu, press the OK button (26) on the remote control or the UP arrow button (6) on the
projector. Select a playback action and press the OK button (26) on the remote control or the UP arrow button (6) on
the projector to confirm. The available playback actions vary by media type.
6.5

The settings menu

To open the settings menu, press the MENU button (8)(24). You can navigate between Picture, Sound, Time and
Options with the LEFT (10)(25) and RIGHT (7)(33) arrow buttons.
Select a menu item with the UP (6)(32) and DOWN (9)(34) arrow buttons. To open a menu item, press the OK button (26)
on the remote control or the INPUT/OK/PLAY/PAUSE button (11) on the projector.
To go a step back, press the MENU button (8)(24). To close the settings menu immediately, press the BACK button (23)
on the remote control.
Picture
Picture mode
Select the desired picture mode (Standard, Mild, Dynamic, Personal) with the LEFT (10)(25) and RIGHT (7)(33) arrow
buttons. Select Personal picture mode to manually set values for contrast, brightness, colour and sharpness. Use the
arrow buttons to do this.
Colour temperature
Select the desired colour temperature (Normal, Warm, Personal, Cold) with the LEFT (10)(25) and RIGHT (7)(33) arrow
buttons. Select Personal colour temperature to manually set values for red, green and blue. Use the arrow buttons to do
this.
Aspect ratio
Select the desired aspect ratio (16:9, 4:3) with the UP (6)(32) and DOWN (9)(34) arrow buttons.
Noise reduction
Select the desired noise reduction (Off, Low, Middle, High) with the UP (6)(32) and DOWN (9)(34) arrow buttons.
Projection direction
Select this menu item and press the OK button (26) or the INPUT/OK/PLAY/PAUSE button (11) to change the orientation
of the projected picture. Switch between projection direction settings (Front, Rear, Ceiling, Ceiling Rear) with the OK
button (26) or INPUT/OK/PLAY/PAUSE button (11).
Reduce display size
You can shrink the projected picture to 75% during playback. Select the desired value with the LEFT (10)(25) and
RIGHT (7)(33) arrow buttons.
HDMI mode
Select PC if you are connecting a PC or laptop. Select VIDEO if you are connecting an audio/video device (e.g. a DVD
player).
Sound
Sound mode
Select the desired sound mode (Standard, Music, Movie, Sports, Personal) with the LEFT (10)(25) and RIGHT (7)(33)
arrow buttons. Select Personal sound mode to manually set values for treble and bass. Use the arrow buttons to do
this.
Surround sound
Press the OK button (26) or INPUT/OK/PLAY/PAUSE button (11) to switch surround sound ON or OFF.
Equalizer
Select the desired value (0 - 100) for each frequency band (120 Hz, 500 Hz, 1.5 kHz, 5 kHz, 10 kHz) with the UP (6)(32)
and DOWN (9)(34) arrow buttons.
05