Product Disposal; Technical Specifications - Nice Era-Era Zero ES Installationsaleitung

Emergency manual manoeuvre
(for model E MH only)
The model E MH is equipped with a mechanism fitted in
the motor head (fig. 7-f) which enables the user to make
an emergency manual manoeuvre by rotating the rod in
one direction or the other. To avoid premature wear of the
mechanism, it should be used exclusively in the event of an
emergency, such as a power failure.
Caution! – During this emergency manoeuvre, the
shutter must NOT exceed the travel limits "0" and "1"
set during product installation.

Product disposal

This product is an integral part of the automation and
therefore must be disposed together with the latter.
As in installation, also at the end of product lifetime, the
disassembly and scrapping operations must be performed
by qualified personnel.
This product comprises various types of materials: some
may be recycled others must be disposed of. Seek infor-
mation on the recycling and disposal systems envisaged
by the local regulations in your area for this product cate-
gory.
Caution! – some parts of the product may contain pollu-
tant or hazardous substances which, if disposed of into the
environment, may cause serious damage to the environ-
ment or physical health.
As indicated by the symbol alongside, dis-
posal of this product in domestic waste is
strictly prohibited. Separate the waste into
categories for disposal, according to the me -
thods envisaged by current legislation in your
area, or return the product to the retailer when purchasing
a new version.
Caution! – Local legislation may envisage serious fines in
the event of abusive disposal of this product.
What to do if...
(troubleshooting guide)
The motor does not move even if powered in an Ascent
or Descent phase:
1) check whether a thermal cut-out has tripped: In this
case wait for the motor to cool;
2) check that the mains power is ON and that it corre-
sponds to the values on the motor dataplate.
3) check whether the two limit switches, due to incorrect
settings, engage at the same time; in this case rotate
the two adjustment screws through a few turns, in the
direction of the "+" sign.
After these checks, if the motor still does not move,
contact a specialist technician or the Nice Assistance
Service.

Technical specifications

● Power supply voltage and frequency; current and
power; torque and speed: Refer to the technical data on
the dataplate of each model. ● Motor diameter: 45 mm (E
S: 35 mm). ● Nominal operating time: Maximum 4 min-
utes. ● Protection rating: IP 44 (tubular motor). ● Oper-
ating temperature: -20°C (minimum). ● Connection
cable length: 2.5 m.
Notes:
- All technical specifications stated in this section refer to
an ambient temperature of 20°C (± 5°C).
- Nice reserves the right to apply modifications to the
product at any time when deemed necessary, maintain-
ing the same intended use and functionality.
English – 4