Operating Elements And Connections - Omnitronic C-50A Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

1 Level control
2 Signal input
3-pin, balanced XLR input for connecting audio units with
line level output (e.g. CD players).
3 Feed-through output
3-pin, balanced XLR output, connected in parallel to the
XLR input, for feeding the input signal to a unit with line
input, e.g. another active speaker system.
4 Power input with fuseholder
Used to plug the supplied power cord in. Only replace the
fuse when the device is disconnected from mains. Only
use fuses of the same rating and power. The correct fuse
value is specified on the rear panel.
5 Power switch with indicator
Turns power to the speaker system on and off.
6
Power indicator
Lights up when the speaker system is turn on.
7 Tone controls HI and LO
8 Mounting bracket or wall mounting
9 Locking screws
16/20 00043576.DOC, Version 1.3