Display Items; Repeat And Shuffle Play; Radio; Storing And Receiving Stations - Sony CDX-R6750 Bedienungsanleitung

CD
For details on connecting to a CD/MD changer,
see page 12.

Display items

A Source, Clock*
B Group number/Track number/Elapsed
playing time, Disc/artist name, Group name,
Track name, Text information*
*1 When the clock mode is set to "on" (page 12).
*2 When playing an MP3, ID3 tag is displayed and
when playing a ATRAC CD, text information written
by SonicStage, etc. is displayed.
To change display items B, press (DSPL) on the
card remote commander; scroll display items B,
press (SCRL) or set to "A.Scroll-on" (page 12).
Tip
Displayed items will differ, depending on the disc type,
recorded format and settings. For details on MP3, see
page 15; ATRAC CD, see page 16.

Repeat and shuffle play

1
During playback, press (1) (REP) or
(2) (SHUF) repeatedly until the
desired setting appears.
Select
Repeat-Track
Repeat-Group* group repeatedly.
SHUF-Group* group in random order.
SHUF-Disc
* When an MP3/ATRAC CD is played.
To return to normal play mode, select "Repeat-
off" or "SHUF-off."
8
A
B
1
2
To play
track repeatedly.
disc in random order.

Radio

Storing and receiving stations

Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
(With the card remote commander)
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW or LW.
2
Press (MENU), then press M or m
repeatedly until "BTM" appears.
3
Press (ENTER).
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.

Storing manually

1
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
"MEM" appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previous stored station will be replaced.
Tip
When a RDS station is stored, the AF/TA setting is
also stored (page 9).

Receiving the stored stations

1
Select the band, then press a number
button ((1) to (6)) or (GP/PRESET) –/+.

Tuning automatically

1
Select the band, then press (SEEK) +/–
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want to
listen to, press and hold (SEEK) +/– to locate the
approximate frequency, then press (SEEK) +/–
repeatedly to fine adjust to the desired frequency
(manual tuning).