Installation And Mounting; Precautionary Measures; Sensor Assembly - MICRO-EPSILON wireSENSOR P115-M Betriebsanleitung

Installation and Mounting

4.
4.1
Uncontrolled retraction
of the measuring wire is
Do not pull the measuring wire over range
incorrect!
> Damage to or destruction of the sensor is possible.
> Danger of injury
from whiplash effect
Do not damage the measuring wire.
of the wire with as-
Do not oil or grease the measuring wire.
sembly bolts/clips
Do not bend the measuring wire
> Destruction of wire
Do not pull the measuring wire at an angle.
and/or of sensor.
Do not allow to loop the measuring wire around objects.
Save the wire during
installation work.
Do fix the measuring wire to the target when wound up.
Do not loop the measuring wire round parts of the body.
4.2
- Series Z60: 2x M4 screws DIN 931, see
- Series P96: 4x M6 screws DIN 931 and 2 groove stones, see
- Series P115: 4x M6 screws DIN 931 and 2 groove stones, see
- Series P200: 4x M8 screws DIN 912 and 4 groove stones, see
The sensor does not have to be oriented in a special way.
This prevents that liquids penetrate the measuring wire outlet.
i
wireSENSOR, Z60-M / P96-M / P115-M / P200-M
Installation and Mounting

Precautionary Measures

Sensor Assembly

Choose the installation position so that damage and soiling of the measuring wire is avoided.
Prefer an installation position with measuring wire outlet facing downwards.
Do not let snap the measuring wire!
No warranty by damage through snapping.
Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Page 32