Overview Of The Remote Control Buttons - Sony WEGA KLV-23HR2 Bedienungsanleitung

Overview of the Remote Control Buttons

*Remote control of
the KLV-21SR2
d Selecting the input source:
Press this button repeatedly until the input symbol of the desired source appears on the screen.
e Turning on the Sleep Timer function:
Press this button to set the TV to automatically switch to the standby mode after a specified time
period. For more details, refer to "Sleep Timer Function" on page 45.
f Selecting channels:
Press this button to select channels.
For double-digit programme numbers, enter the second digit within 2.5 seconds.
g a) If the TV is selected:
Press this button to watch the last channel selected (the last channel watched for at least five seconds).
b) If the VCR is selected:
For Sony's VCR double-digit programme numbers, e.g. 23, press this button first then press the 2 and
3 buttons.
h Selecting a screen format:
Press this button repeatedly to change the screen format. For more details, refer to "Screen Control"
on page 36.
22
Overview
*
a Switching the TV to the standby mode:
Press this button to temporarily turn off the
TV and switch it to the standby mode (the
/ (Standby/Sleep) indicator on the TV
lights up in red). Press it again to switch on
the TV from the standby mode.
To save energy, we recommend switching
the TV off completely when the TV is not in
use.
If no signal is received or no
operation is performed in the TV
mode for 10 minutes, the TV
automatically switches to the standby
mode.
b Switching the VCR or DVD on/off:
Press this button to switch your VCR or DVD
on or off.
c Selecting the VCR, TV or DVD (Media
Selector):
With this remote control you can operate not
only this TV but also the main functions of
your VCR or DVD.
Switch on the equipment you want to operate
and press this button repeatedly to select
VCR, TV, or DVD. The green light just
above the selected equipment lights up
momentarily.
An initial setup is required to
synchronise this remote control to
your VCR or DVD. This setup
depends on the manufacturer. For
more details, refer to "Remote
Control Configuration for VCR/
DVD" on page 67.