Connecting The Bru-300/300P Optical Multiplex Unit - Sony RM-BR300 Gebrauchsanweisung

Connecting the BRU-300/300P
Optical Multiplex Unit
You can control the camera using this unit via the BRU-
300/300P Optical Multiplex Unit (not supplied).
1 2 3 4 5 6 7 8 9
1 2 3
OFF ON
75 IR SELECT
VISCA RS-422
EXT SYNC IN VIDEO S VIDEO IN VISCA RS-232C OUT
BRBK-303 Optical
Multiplex Card
CAMERA
T VIDEO
(or S VIDEO)
75-ohm coaxial
cable (or S-
video cable)
Video monitor, etc.
VISCA RS-232C
* The VISCA RS-422 connection is also available if you use the
VISCA RS-422 connectors.
Camera
!
to AC outlet
DC IN
12V
CCFC-M100 Optical
Fiber Cable
to AC outlet
AC power cord
(supplied with the
BRU-300/300P)
BRU-300/300P
Optical Multiplex
Unit
VISCA RS-232C IN
RS-232C cable
(supplied)*
(SONY: 1-590-879-3X)
to AC outlet
Notes
When using the VISCA RS-232C connectors or VISCA
RS-422 connectors, check the VISCA FUNCTION
switch on the rear of the Optical Multiplex Unit and the
DIP switch on the bottom of this unit (page 7) are set to
RS-232C or RS-422 correctly.
11
GB
Connections