TESTBOY TB 312 Bedienungsanleitung Seite 50

Operation
Connect the multimeter to a USB port on your PC and hold down the
"HOLD" button until "PCLINK" appears on the display.
If the driver is not installed automatically, open the "drivers" folder
on the CD
Run the xxxInstaller.exe in the appropriate folder of your operating
system.
The following operating systems are supported: Windows 2000, XP,
2003, Vista and Windows 7.
Once the drivers have been installed successfully, a virtual COM port
is generated. Please refer to the device manager for the assigned
COM port (COM2, COM3, etc).
Configure this COM port in the program's main window (top left) and
press "Connection".
Depending on where the rotary selector switch is positioned on the
multimeter, you will see a copy of the display in the top left section of
the main window, with an XY plot beneath it, and on the right‐hand
side the data is transferred to a list that you can then easily save,
transfer to EXCEL or print.
50
®
Testboy TB 312