Tektronix P5210 Anleitung Seite 18

Getting Started
Small Hook Tip. Use the small hook tip for making con-
nections to small conductors such as component leads.
The hook tip is rated for the maximum input voltage of
the P5210 High Voltage Differential Probe.
Install the small hook tip by sliding it over the body of
the probe and screwing it onto the threaded probe tip
.
To use the tip, hold the probe body and pull the tip
shield back. Hook the tip onto the circuit and release
the shield.
Large Hook Tip. Use the large hook tip when working
with larger components such as the bolt terminals and
bus bars typically found in power distribution equip-
ment. The hook tip is rated for the maximum input
voltage of the P5210 High Voltage Differential Probe.
Install the large hook tip by sliding it over the body of
the probe and screwing it onto the threaded probe tip.
P5210 Instructions
7