09.02 Remote control
2
3
5
6
8
9
10
GB
You can select the desired function from the remote control by short pressing of the
appropriate button. A desired function is activated within 1-2 seconds after pressing the button.
10
Exchange of batteries
11
Dry-run protection
Your HOESCH whirltub is equipped with dry-run protection. The pump, the lighting or the disinfection function can be
started only when the green LED diode is on. The dry-run protection constitutes a protection against starting the system
when the bathtub is empty or the water level is too low.
22
Display module
1
4
7
Yellow LED diode
11
■
fl ashes when disinfection is required
Green LED diode
■
Whirltub ready to work/standby, i.e. the minimum water level has been reached
Red LED diode
■
fl ashes during disinfection process
■
fl ashes while disinfection process is active which means that the reservoir is empty
(only in case of automatic disinfection - additional accessories)
■
It pulses after fi nishing the disinfection and signals that the bathtub
should be emptied
Minimum height of water level
Yellow LED diode
Green LED diode
Red LED diode
Minimum height
of water level