Tail Stock; Mounting The Tool Rest; Mounting The Toolholder - Holzmann D 510F Betriebsanleitung

The 4-zag carrier is by inserting the fixing bar (A) on
left headstock released.

14.3.3 Tail stock

Slide the Live center with momentum in the
tailstock spindle.
With the handwheel can the tailstock spindle be
placed in the desired position.
Tailstock spindle can be fix or solve with the
clamping lever
The Live center is to turn back the tailstock spindle to the far right back out of the quill down.

14.3.4 Mounting the tool rest

 Remove the tailstock from the machine bed.
 The tool holder (10) on the machine bed defer.
 The tool rest (11) Clamp mounting on the bracket (10)
and with the clamping levers (A).
 The tailstock slide it back into the machine base and
clamp.

14.3.5 Mounting the toolholder

 remove the screws (C) from the machine.
 screw on the toolholder (B) on the machine.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
A
fixing lever
11
10
ASSEMBLY
A
B
C
26
D 510F