Safety Advice / Operation; Operation; Connecting The Compressed Air Source - Parkside PDSP 1000 A1 Originalbetriebsanleitung

Safety advice / Operation

J
D ANgER OF INJURY! Disconnect the device from the com-
pressed air source before filling it with blast medium.
J
N OTE! Please observe the safety advice provided by the manu-
facturer of the blast medium.
J
U se only materials for the blast medium that are suit-
able for the sandblasting gun. Do not use quartz sand.
There is the danger of toxic silicon dust forming.
J
T ake precautions to ensure that other people are not
contaminated (dust generation).
J
E nsure that the spent blast medium is trapped and
collected so that it can be disposed of in an environ-
mentally compatible manner.
J
Do not remove rating plates or labels - they are safety-relevant
parts of the device.
J
If you are inexperienced in the use of this type of device, you should
seek out information or training to learn how to handle it safely.

Operation

Q

Connecting the compressed air source

Q
NOTE: Operate the sandblasting gun
sate- and oil-free compressed air and never exceed the maximum
working air pressure at the device of 8 bar.
NOTE: The compressed air source must be fitted with a (filter) / pres-
sure reducer so that the air pressure can be regulated.
j
C onnect the sandblasting gun to a suitable compressed air source
by connecting the quick-release coupling of the air supply hose with
the plug-in nipple
place automatically.
10 GB/IE
to the sandblasting gun
3
only with cleaned, conden-
1
. It locks itself in
1