Setting Up And Connecting; Grill Plates; Starting Up The Appliance - WMF LONO Gebrauchsanweisung

Setting up and connecting

▪ Remove all packaging from the appliance.
▪ Clean the appliance (see chapter "Cleaning and care").
▪ Place the appliance on a stable and level surface near a socket.

Grill plates

You can regulate the temperature of each grill plate (1) individually. Therefore
you can prepare foods simultaneously at different cooking temperatures or keep
cooked food warm on one of the grill plates (1).
Inserting
Place the grill plates (1) on the base (2); make sure that the protruding parts on
the grill plates sit in the designated recesses on the base (fig. B).
Then push the grill plates (1) forwards towards the temperature controller (5) (fig.
C); you will hear a click when the grill plates lock into place (1).
Note: You can only insert the grill plates (1) on one side because of the recesses
on the base (2). The holders on the wind guard (6) must be positioned on the
outside as well as on the rear of the base (2).
Removing
Allow the appliance to cool down.
First of all remove the wind guard (6) from the holders (fig. D).
Press the release button (4) on the grill plate (1). This is positioned below each of
the carry handles (fig. F).
Now push the grill plate (1) backwards and remove it by lifting it upwards. (fig. E)
Non-stick coating
Never touch the scratch-sensitive non-stick coating with sharp or pointed
objects. Use a barbecue fork and tongs made of wood or synthetic material. We
recommend using the barbecue tongs provided (7).
When using your new appliance for the first time there may be a little smoke or
odour. This is for technical reasons and is perfectly normal.
Attention: You cannot switch the appliance off at the temperature controller (5)!
Therefore pull out the mains plug after use.

Starting up the appliance

▪ Insert the drip tray (3) into the base (2) (fig. A).
The fat and meat juice collect in the drip tray (3).
▪ Position both grill plates (1) on the base (2) (fig. B).
Note that the grill plates (1) will only fit on one side of the base (2).
▪ Secure the wind guard (6) by inserted it into the holders for the grill plates (1)
(fig. D).
The wind guard prevents the food on the grill from cooling down too quickly
when it is windy and it also protects the work area against fat splashes.
▪ Once the mains plug is connected, the indicator lights are lit to indicate that
the appliance is connected to the mains.
▪ Turn the control knob (5) to the highest level for five minutes in order to
preheat the grill plate. Depending on the food you are grilling, you may then
need to select a lower setting (see chapter "Grilling times").
12