Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Backplate
The backplate can be mounted on the back tube at two different height
positions. In addition, the backplate is continuously adjustable in height. As a
result, the Serena II wheelchair also offers smaller persons a high degree of
freedom of movement in the shoulder area.
To
adjust
the
backplate, you must first remove the
back cushion.
Loosen the four fastening screws
on the inside of the backplate, then
move the backplate into position.
Tighten all screws again to fasten the
backplate.
Push handle
The push handle can easily be
adapted to the requirements of the
assisting person.
Loosen the butterfly screws on both
sides of the push handle and take
them out. Move the push handle into
the desired position, then insert the
butterfly screws into their holes
again.
Make sure to tighten the butterfly
screws again.
48
Serena II
position
of
the
Stand: 04/2017 / V02
Werbung
Kapitel
Inhaltsverzeichnis
