Maintenance, Troubleshooting; Safety Instructions; Maintenance Work; Troubleshooting - bürkert PTB 01 ATEX 2101 Bedienungsanleitung

9. MAINTENANCE,

TROUBLESHOOTING

9.1.

Safety instructions

WARNING!
Risk of injury from improper servicing, repairs and
maintenance!
• The device may be serviced and maintained by authorized techni-
cians only and with the appropriate tools!
• The unit may be repaired by the manufacturer only!
9.2.

Maintenance work

The devices are maintenance-free when operated under the condi-
tions described in this manual.
9.3. Troubleshooting
If malfunctions occur, ensure that:
• the device has been installed correctly,
• the connection has been made properly,
• the device is not damaged,
• all screws have been tightened,
• the voltage and pressure have been switched on,
• the pipelines are free.
14
english
PTB 01 ATEX 2101

Maintenance, Troubleshooting

10. TRANSPORT, STORAGE,
DISPOSAL
NOTE!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature: -40 ... +55 °C.
Damage to the environment caused by device components
contaminated with media.
• Ensure the device and packaging are disposed of in an environ-
mentally sound manner.
• Observe applicable regulations relating to refuse disposal and
the environment.