Canton musicbox S Bedienungsanleitung Seite 24

English
Problem Possible cause
true Wireless Pairing is not 1. the Pairing process can fail if a mobile device is
possible. connected to one of the musicboxes.
2. You have not pressed the Bluetooth
and the relevant volume button (+ or ­) at the
same time.
3. two mobile devices are connected to one of the
two musicboxes.
4. the distance between the two musicboxes is
too high.
5. You have selected the auX input on at least one
of the two musicboxes.
6. One of the two musicboxes is already connected
to a third musicbox via true Wireless.
7. You have pressed the same button combination
on both musicboxes.
One or both musicboxes do not as standard, musicbox 1 plays the left and musicbox
play the desired channels (l,R, 2 plays the right music channel after the connection
l+R). has been made.
46
Solution
1. disconnect all Bluetooth ® connections between
the mobile device(s) and musicbox and repeat the
true Wireless Pairing process.
button 2. Press the Bluetooth button and the volume
® ®
button at exactly the same time.
3. terminate the connection to at least one of the
two mobile devices.
4. Reduce the distance between the two musicboxes
to less than 10 m.
5. select the Bluetooth input on both musicboxes
®
before starting the process.
6. terminate the true Wireless connection between
the two musicboxes according to the instructions.
now start the process with the two chosen music­
boxes according to the instructions..
7. Repeat the pairing process exactly according to
the instructions.
Change the true Wireless mode according to the
instructions.
Problem Possible cause
true Wireless mode 1. You have waited less than 20 seconds between
two musicboxes do not connect switching on the first and the second musicboxes.
with each other after being
2. two mobile devices are connected to one of the
switched off.
two musicboxes.
3. the distance between the two musicboxes is too
high. it should not exceed 10 m.
4.1. You have cancelled true Wireless mode on one
musicbox by pressing the Bluetooth
buttons.
4.2. at least one musicbox was connected with a
third musicbox via true Wireless.
5. You have selected the auX input on both
musicboxes.
the auX input cannot be selected. this musicbox is connected via true Wireless to a
second musicbox which already has the auX input
selected.
English
Solution
1. always wait 20 seconds between switching on
the first and the second musicboxes.
2. terminate the connection to at least one of the
mobile devices.
3. Reduce the distance between the two music­
boxes.
4. set up a new connection between the two music­
® and Mute boxes according to the instructions.
5. select the Bluetooth ® input on at least one
musicbox.
Only select the auX input on the musicbox that
you wish to connect to the mobile device. the
Bluetooth input must be selected on the second
®
musicbox. alternatively, cancel true Wireless mode
according to the instructions
47