Fuses; Lamp Connections - Hensel TRIA 3000 AS Bedienungsanleitung

User manual // TRIA AS Power Pack
34

Fuses

Outlets, in the building
slow charging:
normal charging:
Fuse for modeling lamp
The fuses are general lamp fuses. Make sure that only fuses
with the required value 10 A quick are used.
Fuse for halogen lamp in flash head
The halogen lamp in the head is protected by a 5 x 20 mm
melting fuse.
Caution:
Make sure that, depending on the mains voltage, the right
modeling lamp is in use and protected by the specified type of
fuse (see table below):
300 W halogen lamp:
650 W halogen lamp:
Spare fuses for the power pack
Spare fuses are integrated in the grip rod of the bracket.

Lamp connections

Caution:
Before connecting lamp heads to the TRIA power pack, check
the mains voltage and make sure that the head is allowed to
be operated (115 V~ / 230 V~ / Bi-Voltage).
The EH Pro flash head line has been specially designed for
use with Tria AS power pack. It is also possible to use Hensel
flash heads of series MH. Before starting up, the maximum
loading of the flash head must be observed (minimum 3000
Ws).
Ue = 230 V
10 A
16 A
Ue = 230 V
2 AF quick
4 AF quick
HENSEL-VISIT GmbH & Co. KG
Ue = 115 V
16 A
20 A
Ue = 115 V
4 AF quick
----