Troubleshooting - Weber PERFORMER 88991 Bedienungsanleitung

PROBLEM
Burner burns with a yellow or orange flame, in
conjunction with the smell of gas.
Burner does not light, or flame is low.
Burner flame pattern is erratic.
Inside of lid appears to be "peeling" . (Resembles
paint peeling.)
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
20

TROUBLESHOOTING

Inspect Burner for possible obstructions.
Is LP fuel low or empty?
Is fuel hose bent or kinked?
Does the burner light with a match?
Is the hose to burner tube connection properly
secured?
Is burner clean?
What you are seeing is baked on grease that has
turned to carbon and is flaking off.
THIS IS NOT A DEFECT.
.
®
CHECK CURE
Clean Burner.
(See "Maintenance" section)
Replace LP cylinder.
Straighten fuel hose.
If you can light the burner with a match, then check
the ignition system.
Connect the gas hose to the burner tube using the
metal retaining clip provided.
DANGER: Do not use the gas ignition feature
if the retaining clip is missing. A missing
retaining clip can cause serious bodily injury
or death, and damage to property.
Contact Customer Service for a replacement retainer
clip.
Clean burner.
(See "Maintenance" section)
Clean thoroughly.
(See "Cleaning" section)