Herunterladen Inhalt Inhalt Diese Seite drucken

profiline BTI-WKS 115 Bedienungsanleitung Seite 30

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Instructions for use
• Always observe the safety instructions
and applicable regulations.
• Ensure all materials to be ground or cut
are secured in place.
• Apply only a gentle pressure to the tool.
Do not exert side pressure on the disc.
• Avoid overloading. Should the tool
become hot, let it run a few minutes
under no load condition.
Prior to operation:
• Install the guard and appropriate disc or wheel.
Do not use excessively worn discs or wheels.
• Be sure the inner and outer flange are mounted
correctly.
• Make sure the disc or wheel rotates in the
direction of the arrows on the accessory and
the tool.
Switching on and off (fig. A)
• To run the tool, press the on/off switch (1).
• For continuous operation, press the switch
completely forward.
• To stop the tool, release the switch. To stop the
tool in continuous operation, press on the back
part of the switch.
Do not switch the tool on or off when
under load.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your BTI Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular
cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an authorized BTI repair agent
where it will be disposed of in an environmentally
safe way.
GUARANTEE AND SERVICE
All BTI products are thoroughly tested before
leaving the factory. However, in case the
product becomes defective, please take it to
your nearest BTI service station.
If your BTI product becomes defective due to
faulty material or workmanship within 12 months
from the date of purchase, we guarantee to
replace all defective parts free of charge, or, at
our discretion, replace the unit free of charge,
provided that:
• The product has not been misused.
• Repairs have not been attempted by persons
other than our own service staff or the staff
of authorized repairers.
• Proof of purchase date is provided.
This guarantee is offered as an extra benefit
and is additional to consumers statutory rights.
E N G L I S H
29

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für profiline BTI-WKS 115

Diese Anleitung auch für:

Bti-wks 125 e

Inhaltsverzeichnis