What To Do If; Correcting Malfunctions - AEG Electrolux SANTO S80408-KG8 Gebrauchsanweisung

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other
work on the appliance if the following information does not provide
assistance in your specific case.
Warning! Repairs to refrigerators/freezers may only be performed by
1
qualified service engineers. Improper repairs can give rise to significant
hazards for the user. If your appliance needs repairing, please contact
your specialist dealer or our Customer Service.
Symptom
The appliance is not
working, the temperature
displays are dark.
The food is too warm.
38
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is defec-
tive.
Mains socket is defective.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is standing
next to a heat source or is
not sufficiently ventilated.
Solution
Switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an electri-
cian.
Please look in the " Tem-
perature Adjustment" sec-
tion.
Open the door only as long
as necessary.
Set the operating mode to
COOLMATIC or
FROSTMATIC.
Turn the temperature regu-
lator to a colder setting
temporarily.
Please refer to the section
"Where to install", ensure
sufficient ventilation for
the appliance.
818 42 32-00/0