32 electrolux
INSTALLATION
Location
The appliance should be installed
well away from sources of heat such as
radiators, boilers, direct sunlight etc.
Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to your
domestic power supply. Voltage can
vary by ±6% of the rated voltage.
For operation with different voltages, a
suitably sized auto-transformer must be
used.
The a a ppliance m m ust b b e e e arthed.
The power supply cable plug is provided
with a contact for this purpose.
If the domestic power supply socket is
not earthed, connect the appliance to a
separate earth in compliance with
current
regulations,
specialist technician.
The
M M anufacturer
responsibility
i i f
precautions a a re n n ot o o bserved.
This appliance complies with the
following E.E.C. Directives:
- 8 8 7/308 E E EC of 2/6/87 relative to radio
interference suppression.
- 7 7 3/23 E E EC of 19.2.73 (Low Voltage
Directive)
modifications;
-
8 8 9/336
(Electromagnetic
Directive)
modifications.
consulting
d d eclines
t t he
a a bove
and
subsequent
E E EC
of
3.5.89
Compatibility
and
subsequent
Door reversibility
The appliance is supplied with the
door opening to the right.
For door opening in the
opposite direction, perform
the following actions prior to
installation
1. Unscrew the upper pin and remove
the spacer
a
2. Remove the door.
3. Unscrew with a key the lower pin
a a ll
and replace it on the opposite side.
s s afety
4. Reinsert the door, refit the spacer
and rescrew the upper pin on the
opposite side.