Hints And Tips - ZANKER KDT 10032FK Benutzerinformation

Option Multitab
1. Set the programme.
2. Press and hold simultaneously
Activate this option when you use multi-tablets that integrate the salt, rinse aid and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the flow of rinse aid and salt. The related indicators are off.
This option also deactivates the release of rinse aid but only when the rinse aid dispenser is deactivated (rinse aid
indicator does not come on). If the rinse aid dispenser is activated, rinse aid is released even with the option Multitab
activated.
With the use of this option the programme duration is prolonged to increase the cleaning and drying results with the
use of multi-tablets.
Multitab is not a permanent option and must be selected at every cycle.
Opening the door while the appliance operates
If you open the door while a programme is running, the appliance stops. When you close the door, the appliance
continues from the point of interruption.
End of the programme
When the programme is completed and you open the door, the appliance is automatically deactivated.
Close the water tap.

Hints and tips

General
The following hints will ensure optimal cleaning and
drying results in daily use and also help to protect the
environment.
• Remove larger residues of food from the dishes into
the waste bin.
and until the indicator
•
•
•
comes on.
Do not pre-rinse dishes by hand. When needed, use
the prewash programme (if available) or select a
programme with a prewash phase.
Always use the whole space of the baskets.
When loading the appliance, make sure that the
dishes can be completely reached and washed by
the water released from the spray arm nozzles.
11