Opening The Configuration Manager - Auerswald COMpact 4000 Anleitung

First Setup
3.
Hang up the receiver and then pick it up again.
4.
In sequence, dial ##8, the 6-digit admin PIN (none in the factory settings),
*931*, the 12-digit
and #.
5.
Hang up the receiver.

Opening the Configuration Manager

Requirements
– A PC meeting the minimum requirements (see chapter Important Informa-
tion > Minimum Requirements,
1.
Start a browser (for example, Mozilla Firefox or Google Chrome).
2.
Enter the IP address of the PBX in the address field of the browser. Exam-
ple for entering the permanent IP address: https://169.254.1.240.
3.
If necessary, transmit the safety certificate to your working environment
(user and browser profile).
Notes: The data will be encrypted even if you do not transmit the safety cer-
tificate to your working environment.
Since the safety exception rule was saved permanently in the Mozilla Fire-
fox, for example, no more safety warnings will be provided after accessing
the PBX.
4.
Click with wizard (recommended).
5.
Use the configuration wizard to carry out the system activation and config-
ure the basic settings.
40
You will hear the confirmation tone (pulsating tone).
The DHCP client function is disabled in the PBX.
IP address
You will hear the confirmation tone (pulsating tone).
The entered IP address has been configured in the PBX (for subnet
mask 255.255.255.0).
Since the PBX forces an HTTPS connection, your browser will provide
a safety warning (because of the missing safety certificate).
(e. g. for 192.168.2.10: 192168002010)
page 29)
COMpact 4000 - Firmware V6.4 - Setup V02 07/2015