uwell CROWN II Bedienungsanleitung Seite 42

Using the Device
40
Changing the Glass Tank
1. Remove the top cap of the glass tank.
2. Remove the bolt that can now be seen from the air channel by turning it clockwise; you may need to use a small screwdriver or tweezers.
3. Holding the base firm, remove the top glass holder by rotating it anticlockwise. Now the glass element can be removed and replaced.
4. After replacing the glass, screw the bolt back into the air channel. Ensure that the bolt is fully tightened and then refit the top cap
correctly on the atomizer so that liquid cannot leak out anywhere.