Washing Programmes; Select And Start A Washing Programme - Electrolux FAVORIT 30010 I Benutzerinformation

1. Fill up the dispensers for salt and rinse aid again.
2. Adjust the water hardness setting to the highest setting and perform washing pro-
gramme without loading any dishes.
3. Adjust the water hardness setting according to the hardness of the water in your area.
4. Adjust the rinse aid dosage.

Washing programmes

Programme
2)
30 MIN
NORMAL 65°
3)
ECO 50°
1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water
and also by the variations of the power supply and the amount of dishes.
2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs
of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes.

Select and start a washing programme

1. Check that the baskets have been loaded correctly and that the spray arms are free to
rotate
2. Check that the water tap is opened
3. Close the dishwasher's door.
4. Turn the programme knob until the programme marker corresponds with the desired
programme (see "Washing programmes" chart).
– The On/Off indicator light illuminates.
– The indicator lights of the phases foreseen for the programme start flashing.
5. Press the START/RESET button, the programme starts automatically and the START/
RESET indicator light illuminates.
Degree of Type of load
soil
Light soil Crockery and
cutlery
Normal soil Crockery and
cutlery
Normal soil Crockery and
cutlery
Washing programmes
Programme description
43
Consumption val-
1)
ues