Care and cleaning
• The binoculars are maintenance-free. Never attempt to open them or clean the interior
components.
• Do not clean the binoculars by immersing them in water.
• To clean the binoculars and lenses, use the cleaning cloth provided or a dusting brush.
Alternatively, use a soft, lint-free cloth. You can also use a lens cleaning cloth to clean the
lenses. If the binoculars are very dirty, the cloth can be dampened slightly with lukewarm
water or isopropanol.
• If you use a detergent (e.g. isopropanol) to clean the binoculars, do not apply it directly to the
lenses. Always apply the detergent to the cleaning cloth first.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
• Use a damp, lint-free cloth to clean the product.
Disposal
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Zoom ............................................ 10x
Lens Ø .......................................... 50 mm
Eyepiece Ø ................................... 22 mm
Field of view at 1000 m ................. 108 m
Field of view (angle) ..................... 6°
Angle of view (apparent) ............... 60°
Exit pupil ....................................... 5 mm
Relative brightness ....................... 25
Distance from eyes ....................... 20 mm
Dioptre adjustment ....................... ±4
Twilight factor ................................ 22.36
Interpupillary distance ................... 58 – 72 mm
Coating ......................................... Full multilayer coating
Prism design ................................. Porro prism (Bk7 material)
Operating/storage conditions ........ -10 to +50 °C, 0 – 90 % relative humidity
Dimensions (W x H x D) ............... 148 x 72 x 175 mm (unfolded)
Weight .......................................... Approx. 780 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1547779_v1_0617_02_DS_m_4L_(1)