Herunterladen Inhalt Inhalt Diese Seite drucken

What To Do If - IKEA FRAMTID OV10 Handbuch

Vorschau ausblenden Andere Handbücher für FRAMTID OV10:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
4. Push Pyrolytic cleaning button
confirm.
5. Pyrolytic cleaning starts and
mains on the display.
Pyrolytic cleaning process takes 2h 45
min. Do not open the door before the
process is completed. This will abort the
process.
To prevent from risk of burns, when the
oven reaches a certain temperature,
the door is automatically locked.
When the oven cools down, the door is au-
tomatically unlocked.
Changing the oven lamp and cleaning the
glass cover
Warning! Before you change the oven
lamp (refer to "Product description"),

What to do if...

Problem
The oven does not op-
erate
The oven does not op-
erate
The temperature indi-
cator does not come
on
The oven lamp is not
working
The pyrolytic cleaning
is not working (the dis-
play shows "C2")
The pyrolytic cleaning
is not working (the dis-
play shows "C3")
Steam and condensa-
tion settle on the food
and in the oven cavity
to
re-
Possible cause
The required setting have not
been set
The appliance is not correctly
connected or/and the mains
supply to the oven is not on
The required setting have not
been set
The oven lamp bulb is faulty
The meat probe is not re-
moved.
The oven door is open.
Dishes have been left in the
oven for too long
switch off the appliance and disconnect it
from the electrical supply.
1. Turn the glass cover anti - clockwise
and remove it. Clean the glass cover.
2. If necessary, replace the old oven lamp
with a 40 watt, 230V (50Hz), 350 °C
heat resistant oven lamp (Connection
type: G9).
3. Refit the glass cover.
Check if cooking function and
temperature are selected
Check if the appliance is cor-
rectly connected and the mains
supply to the oven is on
Select the cooking function and
temperature
Replace the oven lamp
Remove the meat probe. Close
the oven door, set the control
knob to off position and refer to
"Pyrolytic cleaning" section to
activate the function again
Close the oven door. Refer to
"Pyrolytic cleaning" section to
activate the function again
Do not leave the dishes stand-
ing in the oven for longer than
15-20 minutes after the cooking
process ends
15
Solution

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis