Troubleshooting - Kenwood KDC-X5000BT Bedienungsanleitung

DISPLAY SETTINGS
COLOR SELECT VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*: Selects
your preferred button and display illumination color.
To make your own color, select [CUSTOM R/G/B]. The color
you have made will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color
adjustment.
2 Press S / T to select the color (R/ G/ B) to adjust.
3 Turn the volume knob to adjust the level (0 — 9), then
press the knob.
DIMMER Dim the display illumination and button illumination.
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press
the knob.
2 Turn the volume knob to adjust the [OFF] time, then
press the knob.
(Default: [ON]: 18:00; [OFF]: 6:00)
BRIGHTNESS 1 Select a zone for setting. ( 17)
2 0 — 31: Selects your preferred brightness level for
display illumination and button illumination.
TEXT SCROLL AUTO/ ONCE: Selects whether to scroll the display
information automatically, or scroll only once. ; OFF: Cancels.
* Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/
PURPLE4/ BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/
AQUA1/ AQUA2/ GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/
YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/ ORANGERED
18

TROUBLESHOOTING

Default: XX
Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING THEN
PWR ON" appears.
"PROTECTING SEND SERVICE"
appears.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
• Radio reception is poor.
• Static noise while listening to
the radio.
Disc cannot be ejected.
Noise is generated.
Tracks do not play back as you
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not correct.
"LOADING" appears when you
enter search mode by pressing
.
Correct characters are not
displayed (e.g. album name).
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of the
speaker wires are insulated properly. Turn the power on again.
Send the unit to the nearest service center.
Clean the connectors. ( 20)
Reset the unit. ( 3)
Connect the antenna firmly.
Press and hold M to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit. ( 3)
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
This unit is still preparing the iPod/iPhone music list. It may
take some time to load, try again later.
• This unit can only display uppercase letters, numbers, and a
limited number of symbols.
• Depending on the display language you have selected
( 5), some characters may not be displayed correctly.