Spotify - Kenwood KDC-320UI Bedlenungsanleitung

CD/USB/iPod/ANDROID
Settings to use KENWOOD Remote application
KENWOOD Remote application is designed to control the KENWOOD car
receiver's operations from the iPhone/iPod (via USB input terminal).
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.
For , you can also make the settings in the same way as
connection via Bluetooth. ( 16, 17)
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
USB
MUSIC DRIVE DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 4]) is selected
automatically and playback starts.
1 3
Repeat steps to
SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod USB or ANDROID source,
selects the skip search ratio over the total files.
10
ENGLISH
.
to select the following drives.

Spotify

Preparation:
Install the latest version of the Spotify application on your device (iPhone/
iPod touch), then create an account and log in to Spotify.
• Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. ( 5)
Start listening
1 Open the Spotify application on your device.
2 Connect your device to the USB input terminal.
USB input terminal
3
Press
Broadcast starts automatically.
Default: XX
To
Playback/pause
Skip a track
Thumbs up or thumbs down *
Start radio
* 1
KCA-iP102: 30-pin type, KCA-iP103: Lightning type.
* 2
Do not leave the cable inside the car when not using.
* 3
This feature is available for tracks in Radio only. If thumbs down is selected, the current
track is skipped.
* 4
( 11)
KCA-iP102/KCA-iP103 (optional accessory) *
or accessory of the iPod/iPhone * 2
repeatedly to select SPOTIFY.
On the faceplate
Press
Press S *
3 Press /
Press and hold 5.
1
.
4
/ T.
.