Names And Functions Of Parts - Pioneer DJM-400 Bedienungsanleitung

NAMES AND FUNCTIONS OF PARTS

NAMES AND FUNCTIONS OF PARTS
MIC
CD 1
MIC 1 LEVEL
24
3
0
MIC 2 LEVEL
25
0
EQ
26
EQ
LOW HI
MIC
27
OFF ON TALK
OVER
HEADPHONES
CH-1 CH-2 MASTER
28
LEVEL
FADER
29
START
0
PHONES
30
1 Channel 1 input selector switch
CD 1:
The CD input connectors (line level input) are selected.
PHONO 1/LINE 1:
PHONO/LINE input connectors are selected.
¶ The connection panel's PHONO/LINE switch is used to switch the
function of the channel 1 connectors between phonograph input
(analog turntable input) and line input (line level input).
2 Channel 2 input selector switch
CD 2:
The CD input connectors (line level input) are selected.
PHONO 2/LINE 2:
PHONO/LINE input connectors are selected.
¶ The connection panel's PHONO/LINE switch is used to switch the
function of the channel 2 connectors between phonograph input
(analog turntable input) and line input (line level input).
3 TRIM adjust dial
Use to adjust the input level for each channel. (Adjustable range: –∞
to +9 dB, mid-position is about 0 dB)
4 Channel equalizer high-range adjust dial (HI)
Use to adjust the treble (high-range) frequency sound for each
channel (includes kill function). (Adjustable range: –∞ to +9 dB)
5 Channel equalizer mid-range adjust dial (MID)
Use to adjust the mid-range frequency sound for each channel
(includes kill function). (Adjustable range: –∞ to +9 dB)
6
<DRB1404>
En
1 2
PHONO 1 PHONO 2
CD 2
/LINE 1 /LINE 2
TRIM TRIM
2 CHANNEL DJ MIXER
+ 9 + 9
4 4
HI HI
MASTER
LEVEL
OVER OVER
+ 9 + 9
5 5
4 4
MID MID
2 2
0 0
-2 -2
+ 9 + 9
6 -4 -4 6
LOW LOW
-10 -10
dB dB
7
+ 9 + 9
10 10
9 9
8 8
7 7
6 6
8 8
5 5
4 4
3 3
2 2
1 1
0 0
11
9 10
THRU
12
POWER
13
MASTER
LEVEL
14
3
0
BEAT EFFECTS
15
BPM
AUTO
16
1 2
1
TAP
2 3 4
17
EQ
1 1
4
BEAT PITCH
2 1
8
ERASE
18
4 1
16
BEAT BANK 19
FLANGER PHASER
ROBOT 20
FILTER
ECHO ROLL
DELAY IN-LOOP
SAMPLER
CH. SELECT
2 MIC
1 MASTER
21
LEVEL/DEPTH
FADER
22
START
MIN MAX
ON/OFF
23
¶ When the cross fader selector switch is at the middle (
( ) position, the function is linked to the cross fader lever (not
linked to channel fader).
11 Cross fader selector switch
Select whether or not to use the cross fader, and to select from two
types of curve response.
¶ When the switch is set to left (THRU) position, the cross fader is
disabled, and the channel fader output is mixed without passing
through the cross fader.
¶ When this switch is set to the center (
is enabled, and a slowly rising curve response is selected.
¶ When set to the right position (
a rapidly rising curve response is selected (as soon as the lever
leaves the [< 1] side, the [2 >] sound is heard).
12 Cross fader lever
Outputs channel 1 and channel 2 sounds in accordance with cross
fader curve response selected with the cross fader selector switch.
The cross fader function is disabled when the cross fader selector
switch is set to the [THRU] position.
13 Master level indicators (MASTER LEVEL)
These indicators show the master output level in a monaural display.
Each indicator has a 0.6 second peak hold.
14 Master output level dial (MASTER LEVEL)
Use to adjust the master output level. (adjustable range: –∞ to 0 dB)
6 Channel equalizer low-range adjust
dial (LOW)
Use to adjust the bass (low-range) frequency sound
for each channel (includes kill function). (Adjustable
range: –∞ to +9 dB)
7 Channel level indicators
Display the current level for each channel, with 0.6
second peak hold.
8 Channel fader levers
Use to adjust sound volumes for each channel.
(Adjustable range: –∞ to 0 dB)
9 Channel 1 fader start button/indicator
(FADER START)
Pressing this button toggles ON/OFF, the fader start/
back cue function for the DJ CD player connected to
channel 1. The button lights when set to ON. When
set to ON, the operation differs depending on the
setting of the cross fader selector switch.
¶ When the cross fader selector switch is at the left
(THRU) position, the function is linked to the
operation of the channel fader lever (not linked to
cross fader).
¶ When the cross fader selector switch is at the
middle ( ) or right ( ) position, the function is
linked to the cross fader lever (not linked to
channel fader).
10 Channel 2 fader start button/
indicator (FADER START)
Pressing this button toggles ON/OFF, the fader start/
back cue function for the DJ CD player connected to
channel 2. The button lights when set to ON. When
set to ON, the operation differs depending on the
setting of the cross fader selector switch.
¶ When the cross fader selector switch is at the left
(THRU) position, the function is linked to the
operation of the channel fader lever (not linked to
cross fader).
) position, the cross fader
), the cross fader is enabled, and
) or right