Important Safety Instructions - MSI HomePlug ePower 200AV+ Schnellinstallationsanleitung

MEGA ePower 200AV+
I S
MPORTANT AFETY
This product is intended for connection to the AC power line. For installation instructions,
refer to the Installation section. For removing the device, refer to the Unplug section. The
following precautions should be taken when using this product.
Please read all instructions before installing and operating this product.
Please keep all instructions for later reference.
Please follow all warnings and instructions marked on the product.
Unplug the AC coupler from the wall outlet before cleaning. Use a damp cloth for
cleaning. DO NOT use liquid cleaners or aerosol cleaners.
DO NOT operate this product near water.
This product should never be placed near or over a radiator, or heat register.
This product relies on the building's electrical installation for short-circuit (over current)
protection.
Ensure that a fuse or circuit breaker no larger than 120 VAC 20A or 240 VAC 16A is
used on the phaseconductors (all current-carrying conductors).
DO NOT allow anything to rest on the product interconnect cords. DO NOT locate this
product where people may walk on the cords.
Because the MEGA ePower 200 AV+ Passthrough product sends data over the
powerline, it is recommended that you plug directly into a power outlet. Do not plug the
device into a UPS or power strip with surge protection. The MEGA ePower 200 AV+
Passthrough product has its own power filter for protection against surges.
The product can be operated at an ambient temperature of 40℃.
For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
Only a qualified technician should service this product. Opening or removing covers
may result in exposure to dangerous voltage points or other risks.
Unplug the AC coupler from the wall outlet and refer the product to qualified service
personnel for the following conditions:
When the interconnect cords are damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions are
followed.
If the product exhibits a distinct change in performance.
Page 2
I
NSTRUCTIONS
© MSI Technology GmbH 2009 . All rights reserved.