Renlig FWM6 Handbuch Seite 20

ENGLISH
• remove the filter and clean it under the
tap;
The filter is inserted correctly when the
indicator on its top is visible and
blocked.
• if necessary,
place the filter
cover in the right
position again.
• open the filter
cover and insert
the filter again;
Cleaning the water inlet filters
If the appliance takes long to fill with water
or doesn't fill, the starting button indicator
light blinks in red. Check if the water inlet fil-
ters are blocked (see chapter "What to do
if..." for more details).
Proceed as follows:
1
2
• Unscrew the hose from the appliance.
Keep a rag nearby because some wa-
ter may flow.
• Clean the filter in the valve with a stiff
brush or with the piece of cloth.
20
• close the filter
cover;
• insert the mains
plug again.
• Turn off the water
tap.
• Unscrew the hose
from the tap.
• Clean the filter in
the hose with a
stiff brush.
• Screw firmly the
inlet hose back
onto the tap.