Switching Off; Temperature Regulation; High Temperature Alarm - Electrolux ENKP2549AX Handbuch

To reset the alarm refer to "High tem-
perature alarm".
4. If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "WHAT TO DO IF..." para-
graph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature refer
to "Temperature regulation".

2.3 Switching off

To switch off the appliance do these
steps:
1. Press the appliance ON/OFF button
for 5 seconds.
2.
The display switches off.
3. To disconnect the appliance from the
power disconnect the mains plug
from the power socket.
2.4 Switching on the wine cellar
To switch on the wine cellar :
1. Press the Mode button until the cor-
responding icon appears.
The wine cellar Off indicator flashes.
2. Press the OK button to confirm.
3. The wine cellar Off indicator goes off.
To select a different set temperature refer
to "Temperature regulation".
2.5 Switching off the wine cellar
To switch off the wine cellar:
1. Press the Mode button until the cor-
responding icon appears.
The wine cellar Off indicator and the
wine cellar compartment indicator
flash.
The wine cellar temperature indicator
shows dashes.
2. Press the OK button to confirm.
3.
The wine cellar Off indicator is shown.

2.6 Temperature regulation

The set temperature of the wine cellar and
of the freezer may be adjusted by press-
ing the temperature regulators.
Set default temperature:
• +10°C for the wine cellar
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be reached with-
in 24 hours.
After a power failure the set tem-
perature remains stored.
2.7 Action Freeze function
To switch on the function:
1. Press the Mode button until the cor-
responding icon appears.
The Action Freeze indicator flashes.
2. Press the OK button to confirm.
The Action Freeze indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1. Press the Mode button until the Ac-
tion Freeze indicator flashes.
2. Press the OK button to confirm.
3.
The Action Freeze indicator goes off.
The function switches off by se-
lecting a different freezer set tem-
perature.

2.8 High temperature alarm

An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2.
The buzzer switches off.
3. The freezer temperature indicator
shows the highest temperature
reached for a few seconds. Then
show again the set temperature.
4. The alarm indicator continue to flash
until the normal conditions are re-
stored.
When the alarm has returned the alarm in-
dicator goes off.
ENGLISH 37