Bauknecht DKN 1760 IN Benutzerhandbuch Seite 12

DESCRIPTION OF HOOD
1. Control panel.
Light: move the switch to the right or press the button to switch on.
Extraction speed : Move the switch to the right or press the next button to increase
extraction speed (or open the electric shutter)
2. Grease filters.
3. Lamp covers (or halogen lamps, depending on the model).
4. Telescopic flue.
Grease filters:
Metal grease filters have an unlimited life and should be washed once a month either by hand or in
a dishwasher at a low temperature and with a short cycle.
Note: Washing in a dishwasher can cause grease filters to turn white, but this in no way affects
efficiency.
a. press the handle to remove the filter
b. remove it.
Wash the filter and leave it to dry, proceeding in reverse order to refit it.
Bulb/s:
Remove the filters and remove the burnt-out bulb.
Refit the filters.
Replacing the halogen bulbs:
1. Disconnect the hood from the mains power supply.
WARNING:
2. Remove the grill.
3. Replace the damaged lamp.
Use Ø35mm E14 28W halogen candle lamps only.
4. Put the grill back.
Fitting or changing the carbon filter (filter versions only).
Change the carbon filter every six months.
1. Remove the grease filters.
2. Fit the filter/s to cover the motor according to the model:
• Align the pins R on the cowl with the slots S, then turn the filter clockwise until it locks in place
• turn the central handle clockwise.
3. Reverse the above procedure to remove the carbon filter.
4. Refit the grease filters.
.
Wear gloves.
GB10
Or