Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL DATA OF MOTOR CONTROL:
Voltage
Output motor
Supply accessories
Operating temperature
-20°C - +55°C
Degree of protection
PE
250V/2A
L
N
230VAC
PE
250V/2A
+
-
MOTOR
MOTOR
24V/150mA
30VDC
MASTER
SECOND
/ LAMP
+ -
WIRING OF CONTROL / SUMMARY
a) start with still dead 230Volts supply cable on the left side of the box.
b) Attach cable eye to ground wire. Then connect ground wire to base
plate with washer and nut (exactly as shown in picture detail).
Connect all other cables to control.
Attention:Check repeatedly that cable colours are connected correctly
to motor. Otherwise motor might be damaged or will not operate
properly. Pay special attention when using distribution boxes.
We recommend the following accessories: LA400-JB40E Kit for
cable extension of one installation unit. Consists of 12m of
cable 6-pole with identical colours, distribution box IP65,cable screw
joints and fastening material
P1
P2
P3
Ω
RADIO
801719
COM STOP/*
1
2
8.2 Ω
8.2
Ω
+
+
+
+
+
Werbung
Inhaltsverzeichnis
