Controls And Functions - JB Systems USB3.1-RDS Bedienungsanleitung

ENGLISH

CONTROLS AND FUNCTIONS

9. Function rotating / push button: This button has 3 different functions:
 Turn the button to change the output level of the player
 Push the button shortly to toggle between the different players: Radio, CD, USB and SD/SDHC
 Keep the button pressed for about 3 seconds to toggle between the 2 available playback modes:
 SINGLE PLAY: when you press the play button, only 1 song will be played. The player stops at
the end of each track and waits at the beginning of the next track.
 NORMAL PLAY: the complete CD or USB storage will be played without interruption.
10. LCD Display: Shows all the important information needed during playback.
11. Disc loading slot: to load a CD, slide it gently into the slot with the printed side facing up. Halfway the
CD will automatically be pulled inside, don't press the CD in the slot with force, this will damage the
loading mechanism! Only use standard size CD's (Ø=12cm), never try to insert mini CD's with or
without adapter !
12. Eject Button: press this button to eject the inserted CD.
13. PLAY/PAUSE button:
 In CD, USB or SD/SDHC mode: every time you press the PLAY/PAUSE button the player changes
from play to pause or from pause to play.
 In AM/FM radio mode: keep the button pressed for about 3 seconds to store the current radio station
as preset 1 of the selected band.
14. STOP Button :
 In CD, USB or SD/SDHC mode : Press this button to stop the playback of the current track and to
return to the very first track on your media support.
 In AM/FM radio mode: keep the button pressed to store the current radio station as preset 2 of the
selected band.
15. PRE Button :
 In CD, USB or SD/SDHC mode: this button has 2 functions:
 Press the button shortly to go back to the starting point of the track. If you press several times,
you can skip to the previous songs.
 Keep the button pressed to navigate backwards in the current song
 In AM/FM radio mode:
 Press the button shortly to activate the Auto Seek mode. The tuner will search for the next strong
radio signal by exploring the frequencies downwards.
 Keep the button pressed for about 3 seconds: the tuner will go into Manual Seek mode. Each
time you will press this same button shortly, the frequency will now decrease by one step. You
can use the NEXT button to increase the frequency by one step. If the PRE or NEXT buttons are
not used for a while, the tuner will return to it's initial Auto Seek mode for your next commands.
16. NEXT Button :
 In CD, USB or SD/SDHC mode: this button has 2 functions:
 Press the button shortly to go to the next track.
 Keep the button pressed to navigate forwards in the current song
 In AM/FM radio mode:
 Press the button shortly to activate the Auto Seek mode. The tuner will search for the next strong
radio signal by exploring the frequencies upwards.
 Keep the button pressed for about 3 seconds: the tuner will go into Manual Seek mode. Each
time you will press this same button shortly, the frequency will now increase by one step. You can
use the PRE button to decrease the frequency by one step. If the PRE or NEXT buttons are not
used for a while, the tuner will return to it's initial Auto Seek mode for your next commands.
JB SYSTEMS
®
4/35
OPERATION MANUAL
USB3.1-RDS