Using The External Microphone; Using The Audio Input - Geemarc LoopHEAR 101 Bedienungsanleitung

USING THE LoopHEAR

Using the External Microphone

Plug the supplied desktop microphone into the MIC JACK at the
back of unit. The external microphone will now override the
built-in microphone. The magnetic field LED indicator will light
up blue when you speak to the built-in microphone or external
microphone.
NOTE: When the external or Internal microphones are in use,
the blue LED light flashes with an intensity depending on the
strength of the transmitted magnetic signal through the loop.

Using the Audio Input

The LoopHEAR
external audio source like a TV set , MP3-4 , computer.
Connect your audio equipment to the 3.5mm socket
(blue) on rear panel of your LoopHEAR
then hear the magnetic signal when you are within 1
meter of the LoopHEAR
the "T" position.
TM
can transmit sound through the loop from an
13
TM
with your hearing aid in
TM
TM
. You will