Repeater Signal - Auerswald COMfortel DECT 900 Installation Und Konfiguration

Basic Settings

Repeater Signal

Repeater Signal
When you press the call control button at the handset, the repeater signal indicates whether the hand-
set is within the repeater's range. It can be heard only if the handset is connected through the repea-
ter. The signal can be switched on and off for each repeater individually.
1. First, disconnect the repeater, whose signal you want to switch on or off, from its power
supply.
2. Insert the power plug back into the power socket, and within 1-5 seconds unplug it again.
3. Re-insert the power plug of this repeater back into its socket.
The repeater's LED will now blink slowly.
4. Switch the repeater off one more time, and switch it on again.
82