Conrad WS 1173 Bedienungsanleitung Seite 45

• Briefly push the button "SET"; the hours of the time flash.
Set the hours with the button "+" or "MIN/MAX".

When changing the time (hours/minutes) or date (year/month/day), the radio tower
icon "" for DCF-reception goes out.
The manual settings for time and date are automatically overwritten when the weather
station receives a correct DCF signal again! The radio tower icon " " is then
displayed again.
If you want to start a reception attempt for the DCF signal yourself, proceed as
described for initial commissioning (chapter 9 b).
• Briefly push the button "SET"; the minutes of the time flash.
Set the minutes with the button "+" or "MIN/MAX".
• Briefly push the button "SET"; the year flashes.
Set the year with the button "+" or"MIN/MAX".
• Briefly push the button "SET"; the month flashes.
Set the month with the button "+" of "MIN/MAX".
• Briefly push the button "SET"; the date flashes.
Set the date with the button "+" or "MIN/MAX".
• Briefly push the button "SET"; the indoor and outdoor temperature flashes.
Select the desired unit with the button "+" or "MIN/MAX".
°C = Degrees Celsius
°F = Degrees Fahrenheit
• Briefly push the button "SET"; the indoor humidity flashes.
If you have a more accurate measuring device available for humidity, the value displayed
by the weather station can be corrected with the button "+" or "MIN/MAX". Set the same
humidity value at the weather station that your measuring device displays as well.

Briefly push the button "ALM" to have the uncelebrated value displayed if required.
Push the button "ALM" again to return to barometric pressure setting.
• Briefly push the button "SET"; the outdoor humidity flashes.
Proceed as described above for indoor humidity calibration.
45