LG TWINWash F4WM10TWIN Bedienungsanleutung Seite 91

Symptoms
Water does not enter washing
machine or it enters slowly
Water in the washing machine
does not drain or drains
slowly
Washing machine does not
start
Washing machine will not
spin
Reason
Water supply is not adequate
in that location.
Water supply tap is not
completely open.
Water supply hose(s) are
kinked.
The filter of the supply
hose(s) clogged.
Drain hose is kinked or
clogged.
The drain filter is clogged.
Electrical power cord may not
be plugged in or connection
may be loose.
House fuse blown, circuit
breaker tripped,or a power
outage has occurred.
Water supply tap is not turned
on.
Check that the door is firmly
shut.
Solution
• Check another tap in the
house.
• Fully open tap.
• Straighten hose.
• Check the filter of the supply
hose.
• Clean and straighten the drain
hose.
• Clean the drain filter.
• Make sure plug fits tightly in
wall outlet.
• Reset circuit breaker or
replace fuse. Do not increase
fuse capacity. If problem
is a circuit overload, have
it corrected by a qualified
electrician.
• Turn on water supply tap.
• Close the door and press
the Start/Pause button. After
pressing the Start/Pause
button, it may take a few
moments before the washing
machine begins to spin. The
door must be locked before
spin can be achieved. Add 1 or
2 similar items to help balance
the load. Rearrange load to
allow proper spinning.
EN
41