Bymat Brushline 1120 RS Bedienungsanleitung Seite 45

SECTION 6: ACCIDENTAL RELEASE MEASURES (continued)
This product is not classified as hazardous to the environment. Keep product away from drains, surface and underground water.
6.3 Methods and material for containment and cleaning up:
It is recommended:
Absorb the spillage using sand or inert absorbent and move it to a safe place. Do not absorb in sawdust or other combustible
absorbents. For any concern related to disposal consult section 13.
6.4 Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE
7.1 Precautions for safe handling:
A.- Precautions for safe manipulation
Comply with the current legislation concerning the prevention of industrial risks. Keep containers hermetically sealed. Control spills
and residues, destroying them with safe methods (section 6). Avoid leakages from the container. Maintain order and cleanliness
where dangerous products are used.
B.- Technical recommendations for the prevention of fires and explosions
Product is non-flammable under normal conditions of storage, manipulation and use. It is recommended to transfer at slow speeds
to avoid the generation of electrostatic charges that can affect flammable products. Consult section 10 for information on
conditions and materials that should be avoided.
C.- Technical recommendations to prevent ergonomic and toxicological risks
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.- Technical recommendations to prevent environmental risks
It is recommended to have absorbent material available at close proximity to the product (See subsection 6.3)
7.2 Conditions for safe storage, including any incompatibilities:
A.- Technical measures for storage
Store in a cool, dry, well-ventilated location
B.- General conditions for storage
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see subsection 10.5
7.3 Specific end use(s):
Except for the instructions already specified it is not necessary to provide any special recommendation regarding the uses of this
product.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Control parameters:
Substances whose occupational exposure limits have to be monitored in the work environment
Phosphoric Acid
CAS: 7664-38-2
EC: 231-633-2
8.2 Exposure controls:
A.- General security and hygiene measures in the work place
As a preventative measure it is recommended to use basic Personal Protection Equipment, with the corresponding <<CE
marking>> in accordance with Directive 89/686/EC. For more information on Personal Protection Equipment (storage, use,
cleaning, maintenance, class of protection,...) consult the information leaflet provided by the manufacturer. For more information
see subsection 7.1.
All information contained herein is a recommendation which needs some specification from the labour risk prevention services as
it is not known whether the company has additional measures at its disposal.
B.- Respiratory protection
The use of protection equipment will be necessary if a mist forms or if the professional exposure limits are exceeded.
C.- Specific protection for the hands
Date of compilation: 11/19/2014
Safety data sheet
According to 1907/2006/EC (REACH), 453/2010/EU, 2015/830/EU
Identification
- CONTINUED ON NEXT PAGE -
Revised: 6/6/2016
Elektrolyt C+
IOELV (8h)
IOELV (STEL)
Year
Version: 2 (Replaced 1)
Environmental limits
1 mg/m³
2 mg/m³
2015
Page 3/9