Before Initial Use; Putting Into Operation - gourmetmaxx Z 00974 Gebrauchsanleitung

Before Initial Use

CAUTION!
■ Keep children and animals away from the packaging material. There is a danger of
suffocation!
■ Danger of burns! The device gets very hot during and after operation! When setting
up the device, ensure that you select a location with enough clearance all around the
device (at least 10 cm to the sides, 30 cm above it) to prevent any build-up of heat.
1. Unpack the device and check the items supplied for completeness (see the "Device
Overview" chapter and "Accessories Overview" chapter) and possible transport dam-
age. If you fi nd transport damage, do not use the device (!), but contact the customer
service department immediately.
2. The device may contain production residues. To avoid harmful effects to your health,
clean the bowl and the accessories thoroughly before using them for the fi rst time
(see the "Cleaning" chapter).
3. Place the device on a dry and heat-resistant fl at surface at a safe distance from fl am-
mable objects. Please make sure that the device is not accessible to children!
4. Plug the mains plug into a properly installed 220 - 240 volt mains socket with earthing
contacts.
5. You should use the device for the fi rst time without any food in it, as it may produce
a small amount of smoke or odours due to coating residues. Allow the device to heat
up for approx. 10 – 15 minutes without any food in it. During this time, make sure the
room is well ventilated, e.g. with wide-open windows! Also note the tips provided in the
"Putting into Operation" and "Use" chapters when putting the device into operation.
6. Then allow the device to cool down completely and clean the bowl again.

Putting Into Operation

CAUTION!
■ Use the device only if it has been properly and correctly assembled in order to ensure
that it will function without problems.
■ Check the device, cable and mains plug for damage before each use. Do not use the
device if it has been visibly damaged!
■ The device should only be connected to a properly installed plug socket with safe-
ty contacts. The plug socket must also be readily accessible after connection. The
mains voltage must match the technical data of the device.
■ Always switch the device off fi rst and pull the mains plug out of the plug socket before
you insert the bowl or any accessories into the device.
Inserting Bowl into the Device
1. Place the device on a solid, stable and heat-resistant surface close to a readily ac-
cessible plug socket.
2. Insert the bowl so that the handles sit in the recesses which are provided for them.
27 EN