Information for testing institutes and users
The standard cotton programme is called «COTTON,
CABINET DRY» on the display and in the operating
instructions.
Consumption according to Directive 2010 / 30 / EU
Average programme duration
at half and full load
Annual energy consumption
64
Cleaning and Care
Cleaning the filters
See chapter «Start programme».
Cleaning the filter support
99 min.
From time to time it is necessary to remove fluffs that
239 kWh
have accumulated inside the filter support. To do so, use
a vacuum cleaner or a cleaning brush.
X Pull the filters A and B out of the filter support in the
door opening.
X Run the pipe of the vacuum cleaner or the brush around
the well of the filter support.
X Remove any residual fluff.
X Replace the two filters properly.
X Close the door.
Cleaning the moisture sensor
After longer operation, small deposits (lime, fabric
refiner) can form on the front inner side of the drum
on both sides of the longish moisture sensors. With
moisture controlled programmes, this can result in the
desired level of dryness not being reached.
Wipe deposits away with a cloth soaked in vinegar.