Tool Specifications; Noise/Vibration Information; Machine Elements; Intended Use - Bosch GST 120 E PROFESSIONAL Bedienungsanleitung

2 609 932 360.book Seite 1 Donnerstag, 11. November 2004 3:12 15

Tool Specifications

Jigsaw
Article number
Jigsaw
Article number
Rated input power [W]
Stroke rate at no load
GST 120 BE [spm]
GST 120 E [spm]
Stroke [mm]
Stroke Rate Preselection
Cutting capacity, max.
Wood [mm]
Aluminium [mm]
in non-alloy steel [mm]
Bevel cuts
(left/right) [°]
Weight according
to EPTA-Procedure
01/2003 [kg]
Protection class
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.

Noise/Vibration Information

Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the ma-
chine are: sound pressure level 86 dB (A); sound
power level 97 dB (A).
uncertainty K = 3 dB.
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
12 • 2 609 932 360 • TMS • 19.10.04

Machine Elements

The numbering of the machine elements refers to
GST 120 BE
the illustration of the machine on the graphics
PROFESSIONAL
page.
0 601 511 6..
While reading the operating instructions, unfold
GST 120 E
the graphics page for the machine and leave it
PROFESSIONAL
open.
0 601 510 6..
650 1 Vibration damper
2 Lock-on button for On/Off switch
500 – 2 800
1 500 – 2 800
3 On/Off switch
26
4 Stroke rate preselection thumbwheel
5 Vacuum hose*
6 Vacuum connection*
120
20
7 Base plate with mit interior extraction
10
8 Sliding shoe for base plate*
0 – 45
9 Switch for sawdust blowing device
10 Lever for adjustment of pendulum action
2.7 (GST 120 BE)
2.6 (GST 120 E) 11 Stroke rod
/ II
12 Guide roller
13 Saw blade*
14 Contact protector
15 Dust cover for vacuuming*
16 SDS clamping lever for saw blade release
17 Scale for mitre angle
18 Angle gauge**
19 Thumbwheel for pre-tension of base plate
20 SDS lever for base-plate adjustment
21 Splinter guard
22 Circle cutter/parallel guide*
Measurement
* Not all of the accessories illustrated or described are
included as standard delivery.
**Commercially available (not included in the delivered
2
.
items)
English - 1
(GST 120 BE)
channel