Assembly Instructions - Skandika Fitness KRATOS SF-1910 Aufbau- Und Bedienungsanleitung

ASSEMBLY INSTRUCTIONS

Note
Most of the listed assembly hardware has been packaged separately. However, some parts are alrea-
dy pre-installed for your comfort. Make sure, that all parts are correctly mounted as described in the
assembly instructions.
PREPARATION:
A. Make sure that you will have enough space around the item.
B. Use the included tools for assembling.
C. Check if all needed parts are available.
We strongly recommend setting up the device with two or more people.
STEP 1
Attach the Front stabilizer
(23) to the front part of the
Main frame (1) with Allen
bolts (21) and Washers (20).
Attach the Rear stabilizer
(3) to the rear part of the
Main frame (1) with Allen
bolts (4) and Washers (58).
STEP 2
Slide the Protective guard (49) onto the Handlebar
Post (46);
Connect the wire (50) to the Sensor wire (53) and fi x
the Handlebar post (46) on Main frame (1) with Allen
bolts (45), Spring washers (44) and Flat washers (12).
Slide down the Protective Guard (49) and fi t in place.
24