Basic Functions; Setting The Clock; Hiding/Displaying The Clock; Safety Blocking - Candy MIC 305 X Gebrauchsanweisung

Basic Functions

Setting the clock

After your microwave oven is first plugged in or
after a power failure, the clock display will flash to
indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Press the Clock key. The hour numbers will
start to flash.

Hiding/Displaying the Clock

If the clock display disturbs you, you can hide it by
pressing the Clock key for 3 seconds. The dots
that separate the hours and minutes will flash but
the rest of the clock display will be hidden.

Safety blocking

The oven functioning can be blocked (for
example, to stop it being used by children).
1. To block the oven, press the Start/Stop key for
3 seconds. You will hear a sound signal and
the display will show the word "SAFE". The
oven is blocked in this state and cannot be
used.
2. Turn the rotating knob to set the correct hour
value.
3. Press again the Clock key to set the minutes.
The minute numbers will start to flash.
4. Turn the rotating knob to set the correct minute
value.
5. To finish, press the Clock key again.
If you want to see the clock display again, press
the Clock key again for 3 seconds.
2. To unblock the oven, press the Start/Stop key
again for 3 seconds. You will hear a sound
signal and the display will show the time again.
EN
37