Battery Replacement; Repair; Symbols - Amprobe TM45A Bedienungshandbuch

Battery Replacement

For battery replacement, the instrument needs to be turned off,
with probe removed.
It is best to replace the batteries as soon as the
appears in the display.
1. Turn instrument face down and remove the screw. Slide
battery hatch down and lift off.
2. Remove the four 1.5V AAA size batteries and replace with
same.
3. Replace the battery hatch and and secure with screw.
Failure to turn off the instrument before installing the batteries
could result in damage to the instrument and to the batteries if
batteries are connected incorrectly to the thermometer.
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material
and workmanship for 1 year from the date of purchase. This
warranty does not cover fuses, disposable batteries or damage
from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are
not authorized to extend any other warranty on Amprobe's
behalf. To obtain service during the warranty period, return
the product with proof of purchase to an authorized Amprobe
Test Tools Service Center or to an Amprobe dealer or distributor.
See Repair Section for details. THIS WARRANTY IS YOUR ONLY
REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS,
IMPLIED OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,
ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT
BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY
CAUSE OR THEORY. Since some states or countries do not
allow the exclusion or limitation of an implied warranty or of
incidental or consequential damages, this limitation of liability
may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or
for calibration should be accompanied by the following: your
� Warning
� Warning
5
�
symbol